Username:

Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Wingman

Pages: [1] 2 3 ... 8
1
Modifications / PCP pistol build challenge.
« on: July 10, 2018, 08:16:06 PM »
With all the BS talk of needing a FAL to purchase a PCP pistols lately I figure lets get some winter workshop home builds and/or Crosman mods going to show just how pointless this BS import ban actually is..

Whos up for a project?  Maybe a little competition to keep it interesting? 

Highest efficiency (shot count per cc)?
Largest cal?
Quietest report?
Highest total energy regardless of shot count or cal?
Lightest or most compact?
A combination of the above? Maybe a free for all?

Open to ideas and suggestions to kick of a fun group build and documentation of build thread.
Who of you tinkerers are keen? Mintie? Danny? Mike P? Brendon? Mike Dvlnme? Shiloh? Sam? Anyone else?



2
For Sale, Wanted, Spotted / Brocock Compatto Bullpup/Carbine .22 cal
« on: December 13, 2017, 06:20:35 PM »
Selling on behalf:

Brocock Compatto Bullpup/Carbine .22cal high power.
Comes with"
Two mags
Fill probe with foster quick release and dive bottle yoke
Nikko Stirling 3-9x4- AO scope
Additional silencer
Spare O ring kit

Tidy PCP, $1500



3
General Airgun Discussion / NEW H&N .30cal Barracuda pellets
« on: November 25, 2017, 02:50:42 PM »
A little late to the party but H&N  just introduced a new .30cal pellet.  The weight fits right between JSBs offerings and they have gone away from the more pointed dome of their std barracuda design.
Well worth testing..




4
General Airgun Discussion / The new Edgun R5
« on: November 13, 2017, 07:26:43 AM »
The new Edgun R5




5
For Sale, Wanted, Spotted / .50cal Dragon Slayer PCP
« on: August 29, 2017, 08:35:30 AM »
These Pcps are well capable of taking even the largest NZ game and is loads of fun to shoot cans with too..

FAL needed for purchase. Selling on Behalf, If interested Ill put you in touch with the seller.
I am happy to do the repairs and service the O rings etc for the new owner.

These PCPs love .495 Hornady or Speer roundball, about  $15 a box of 100. 

It has a small but repairable crack in the stock fore end and a few marks also a broken part in cocking lever.

Fired at least 300 rnds

Comes with spare bolt probe o rings and a fill probe.

$550






















6
For Sale, Wanted, Spotted / Bauer Dive compressors
« on: August 16, 2017, 12:24:39 PM »
Hey guys I have just found us a smoking deal on the world class leader in Dive compressors, Bauer, Made in Germany.

If anyone is interested let me know as  have some being shipped now. 5 weeks away

There are two airgun suitable models, the Bauer Poseidon PE 100 and the Bauer Junior 2.
Normal retail from the Bauer NZ agents is as follows:

PE100 - TW 330Bar WP
3.5cfm or 100ltr/min
2.2kw Single Phase 50Hz Electric Motor
P11 Filtration
1 x Filling hose with filling valve & international adaptor
(Single phase electric):

$6612.50 plus shipping 

Junior II-W 300bar WP
3.5cfm or 100ltr/min
2.2kw Single Phase 50Hz Electric Motor
P21 Filtration
1 x Filling hose with filling valve & international adaptor
B-Timer:

$8051 plus shipping

Our price: PE100 $4600 plus shipping
               Junior II $5750 plus shipping


 
The Junior II and the PE100 are both equipped with the same compressor block which is know for its legendary reliability.  The P11 filtration was developed specifically for the PE100 and uses the same filter cartridge as the P21 Filtration system on the Junior II.  The air quality on both compressors corresponds to the strict standard DIN EN 12021.  The main difference between the P11 purification system and the P21 purification system are; On the purification system P11, for construction reasons no switch over device is available.  Also the use of a B-Timer is not planned at present.  The comfortable arched handle of the Junior II was replace by two simple handles.  Positive effects: Weight and space saving, there is almost a 2kg difference between a PE100 and Junior II due to the P11 Filtration and frame changes.
 
In the standard configuration neither compressor has automatic drains or pressure shutdown but this can be offered additionally if required.











7
For Sale, Wanted, Spotted / Two .50cal Dragon slayer PCPs
« on: August 11, 2017, 04:47:48 PM »
These Pcps are well capable of taking even the largest NZ game and is loads of fun to shoot cans with too..

FAL needed for purchase. Selling on Behalf, If interested Ill put you in touch with the seller.
I am happy to do the repairs and service the O rings etc for the new owner.

These PCPs love .495 Hornady or Speer roundball, about  $15 a box of 100. 

The first is the one has a fore end stock crack that needs repairing and a few marks also a broken part in cocking lever.

Second gun has a new stock but has slow leak at probe end of the cylinder, easy O ring change first has fired at least 300 rnds and second approx 100.

Both come with spare bolt probe o rings and a fill probe.

$1200 for the pair.



































8
Hunting / Matador R3s Busting pest birds
« on: June 09, 2017, 08:39:28 PM »
I have been doing loads of pesting in the last few months and have added several new toys to my collection.
The one I have been using most of late is an early Matador R3 gen 1 steel breech .25cal long and I have tuned it to 910fps for 90 shots on the reg.
It is VERY accurate and I have been favouring it over my .22 std R3 for the longer shots and windy days.
 




I fitted it with a Tac Vector Optics 6-25x 50 scope, a brand which I have really taken to of late as the German Schott glass and mechanics are hard to fault. I could go on for ages about the new TVO marksman range of scopes but for now I will tell you 6 of my PCPs now have one! Even since these pics were taken I have replaced my 4.5-18x56 Falcon Menace scope that has always been on my .22 matador with a TVO 4.5-18x50 that has quickly become my favorite scope.. Ill be getting another one for the .25cal matador to replace the 6-25x 50 as it has a better reticle/clarity and  I never use it past 12x anyway.







Within a week of owning the .25cal I had shot through 5 tins of Kings and found that with a 12X scope setting its holdovers almost match my .22 R3 with the Falcon 4.5-18x56 set on 18x. It made it very quick to get accustomed to the .25 ballistics and has had me pushing the .25 out much further than the .22cal.

A couple of nights ago I got the chance to smash my longest kill with a PCP (.22 R3 204 yards on a hare) and landed a kill shot at 242yards!
I had been shooting it at 230 yards on a gong and was quite surprised in the frequency I could land a shot at that range within 5 inches.
The same evening I saw 3 hares just past my gong ranged at 242 yards. Shooting off my outdoor table off a bipod I dropped this one with a heart lung shot.. a whopping 9ftlbs of retained energy still passed right through at that range.



I have also been visiting a "job" on some stock feed lots, and the matadors have been very successful on the grain thieves. theses pics are from different days..
The same farm has a very large pigeon problem that is next on the list.















9
For Sale, Wanted, Spotted / Dragon slayer .50cal
« on: November 20, 2016, 08:04:59 PM »
Up for grabs is a .50Cal fire breathing "Dragon Slayer" PCP Carbine.

I has had loads of custom work done to the valve, transfer port, hammer stroke and trigger and now shoots a 240gr hollow point to over 230ftlbs of muzzle energy..  just a slight improvement from its factory set limp wristed 135ish ftlbs with 182gr round ball..

It still shoots .495" roundball really well and much faster but this thing loves the hollow points in its current tune.
This Pcp is well capable of taking even the largest NZ game and is loads of fun to shoot cans with too..

It comes with the 240gr HP mould and a custom .498 sizing die for some very cheap shooting or you can pick up boxes of 100x Speer .495" round ball for about $10 from Sportsways.
I has about 50 hollow points made up and has two boxes of round ball to go with it.

The rifle is in pretty tidy condition other than a couple of bruses on the rear of the hardwood stock.
Scope in the photos is no included but comes with a Hawke 3-9x50 AO mildot scope.
Bipod s not included.

$600


SOLD





















10
Members Reviews / New Tuxing 4500psi compact compressor
« on: November 09, 2016, 05:12:46 PM »
After much deliberation I have bought a compressor to fill my PCPs and pony bottles.
I was torn between spending decent money on a Bauer JNR or just take a risk on a cheep Chinese job.
The new Altaros booster looked great but it still relies on a regular work shop compressor to operate which would mean I would have to spend more money upgrading my current workshop cheapo or it would soon let me down.

So after searching many cheap Chinese compressors I found this one that is very well priced and fairly new to the market.

https://www.aliexpress.com/item/PCP-Inflator-Electrical-Air-Compressor-for-airgun-cylinder-High-Pressure-300Bar-4500psi-Paintball-Refilling-110V-220V/32757013722.html

Size   L 35cm x W 18cm x H 34cm
Net Weight 17KG
Power 220V-240V 50HZ  or  100-130V 60HZ
Motor Power   1.8 KW  Pressure :300bar/4500psi
Inflating speed 2800r/min 
Noise78DB

Fill an empty 500cc bottle to 300bar in about 5 minutes and direct airgun cylinders topped up from 120bar to 300bar in 2 mins

It boasts a new design water jacket for better cooling than the open tube tube compressors and seems to have some really great reviews so far.
Buyer reviews here:
https://www.aliexpress.com/item/4500PSI-compressor-300bar-Electric-portable-pump/32691757608.html?spm=2114.13010208.99999999.264.AAz6YJ

I had no real need to fill 12ltr dive bottles with a compressor (which Im sure this one will do) so a lightweight will suit my needs.
It will be mainly used to direct fill my PCPs, top up my 500cc backpack bottle from 180 to 300bar and top up my 3ltr pony bottle from 180bar to 240bar.
Between them all I have more than enough air for an outing.
I had some reserves about build quality but it is a very simple unit and I had the seller pack in enough piston seals, O rings and plastic seats to rebuild the thing ten times over for a very reasonable $7 extra.
The Seller was extremely helpful and seems to know his product with full back up service parts available. 
Fuxing my Tuxing looks to be very simple and it lends itself to loads of upgrades such as a larger oil/air separator.
I just received a litre of high quality Special Bauer full synthetic breathing air compressor oil which cost me a crazy $70 but there is enough for 4 services. (1000 hour intervals)

The unit arrived in New Zealand from China via TNT in a very speedy 4 days! Currently being held in customs but I hope to see it any day now.
Ill add to my review as I spend some time using it.

My expectations are realistic with any Chinese purchase but the price seemed right on this one.. It is really not much more than a motorised 2 stage hand pump and keeping that in mind the price is very reasonable.
I will be using it for very short intervals not hours on end like the shoe box compressor etc require so wear and tear should be a lot less.
















11
General Airgun Discussion / New Altaros-compressor
« on: September 14, 2016, 03:39:52 PM »

Here's a very cool new toy from Altaros in CZ.
Just hook this booster up to your std workshop 70-140psi compressor and it compresses to 4500psi for filling dive bottles or your pcp directly.. retails for around 700USD


"Altaros" Hello,
We would like to take this opportunity to introduce our Altaros compressor  for the home bottle filling on high air pressure up to 300bar/4500 psi .
At the same time, we want  to answer  your questions and ask your opinion on our compressor. We welcome all comments and  type of information that would interest you and should be on our web.
Or some technical improvements that you would like on compressor in the future.
Here is few photos:

















Compressor video test with temperature meassurements



Parameters.
Output pressure   Max 300bar, 30MPa, 4500 PSI
Input pressure   Min 5bar, 70 PSI
   Max 10bar, 145PSI

Size (Height x width x depth)   30x30x60 cm     11.7 x 11.7 x 23.6 inch
Weight   5 kg   11 lb

More detailed information can be found on our website:
 [url=http://altaros-compressor.com/main-page/bassic-info/]http://altaros-compressor.com/main-page/bassic-info/

Or in our manual:
http://altaros-compressor.com/main-page/instruction/

12
For Sale, Wanted, Spotted / .308 Big bore rifle.
« on: July 11, 2016, 10:40:18 AM »
Up for grabs is a Samyang 909 bigbore PCP fitted with a new .30 cal Lothar Walther barrel
The rifle is like new with very little use other than some testing. The twist rate is 1-17.5 so suited to 44-120gr pellets/cast bullets and it seems to shoot the JSB 44 and 50gr pellets well around 900-950fps.
the 360cc air cyl gives you plenty of usable shots and the hammer has two cocking stages for high or low powered shooting.
With the right bullets this .308 has enough energy to knock over goats pigs and deer but would be heaps of fun on rabbits and possums with the Jsb pellets too.

Ill throw in whatever .308 bullets I have laying around and the foster filling probe.
Scope not included.

$650 or trade









13
Video / Rapid Air Weapons factory tour video
« on: July 05, 2016, 07:49:00 PM »
! No longer available

14
Hunting / Another great vid from Ted
« on: June 23, 2016, 04:39:32 PM »
Another great vid from Ted


15
Members Reviews / New PCPs from Evanix
« on: June 09, 2016, 06:46:37 PM »
The first reports of accuracy are terrible as they are un regged and have a shocking shot curve but they probably still have the horrible over sized barrels that wont shoot any pellets/bullets off the shelf.
Interesting design and good power though.





Pages: [1] 2 3 ... 8