Username:

Password:

Author Topic: The starting of a 2250 Build  (Read 9219 times)

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
Re: The starting of a 2250 Build
« Reply #30 on: July 17, 2015, 02:49:50 PM »
Man I love aliexpress less than $100NZ landed.
« Last Edit: July 17, 2015, 02:51:23 PM by parriehunter »
parriehunter.co.nz

Offline Mintie

  • Hero Member
  • *****
  • Posts: 1315
  • Age: 34
  • Location: Auckland/Hawkes Bay
  • Mana 30
    • View Profile
Re: The starting of a 2250 Build
« Reply #31 on: July 17, 2015, 03:00:20 PM »
Even cheaper if you buy 100 at a time lol  ;D

I buy lots of stuff on there. II tend to get impatient waiting for it to turn up so I try to find sellers that are selling it cheaper but charge postage because they send them much faster and ends up being the same kinda of $
Lots of airguns

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
Re: The starting of a 2250 Build
« Reply #32 on: July 17, 2015, 03:33:45 PM »
Haha, don't think i need 100 or could even sell 99 in tardme.

That is interesting I have gone the other way but will have to try your tactic.
parriehunter.co.nz

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
The starting of a 2250 Build
« Reply #33 on: July 17, 2015, 09:23:04 PM »


Got the breech installed.

Quick question, what is the risk of leaving the co2 bottle connected?

Sent from my LT25i using Tapatalk

parriehunter.co.nz

Offline Mintie

  • Hero Member
  • *****
  • Posts: 1315
  • Age: 34
  • Location: Auckland/Hawkes Bay
  • Mana 30
    • View Profile
Re: The starting of a 2250 Build
« Reply #34 on: July 17, 2015, 11:34:36 PM »
Had no trouble leaving mine in, heard its good for the seals to have pressure against them
Lots of airguns

Offline Novagun

  • NZ Airgun
  • Hero Member
  • *
  • Posts: 851
  • Mana -1
    • View Profile
Re: The starting of a 2250 Build
« Reply #35 on: July 18, 2015, 06:32:04 AM »
Watching  watching watching.  I just don't need one but still watching.

Offline JS

  • Full Member
  • ***
  • Posts: 186
  • Age: 35
  • Location: Auckland
  • Mana 7
    • View Profile
The starting of a 2250 Build
« Reply #36 on: July 18, 2015, 08:15:36 AM »
I want one now, they look like fun.
TX200 MKIII .177
Gamo Hunter 440 .22
Feinwerkbau 300s .177
Weihrauch HW80 .22
HW45 .177

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
The starting of a 2250 Build
« Reply #37 on: July 18, 2015, 08:25:08 PM »
Thanks minite, that's good.

Yea it is fun. Hopefully get some nice weather and be able to have a shoot this weekend.
parriehunter.co.nz

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
The starting of a 2250 Build
« Reply #38 on: July 20, 2015, 12:13:03 PM »


As it stands at the moment...

Sent from my LT25i using Tapatalk
parriehunter.co.nz

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
Re: The starting of a 2250 Build
« Reply #39 on: July 21, 2015, 01:28:49 PM »
Just ordered a 3" gun works suppressor, from the couple of shots I have fired I was surprised how audible it is with the cheap suppressor on it. But not wanting to make the gun too long or heavy I shall see how the 3" one fairs.

They only had one in silver but I am sure a quick paint will fix that.



Anyone have any experience with them?

So I will be paying for that next week and ordering a scope from Aliexpress.

Also looking at setting up a little 5m "range" in our garage.
parriehunter.co.nz

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
The starting of a 2250 Build
« Reply #40 on: July 23, 2015, 06:44:11 PM »
Ok, so I got the "tamper proof" bolts off and the stock off. Took the gun apart to see how it works etc and didn't realise the safety had a little ball bearing and spring. Needless to say they are now somewhere in my garage. Hmm. Going to be fun looking for them.

Sent from my LT25i using Tapatalk

parriehunter.co.nz

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
The starting of a 2250 Build
« Reply #41 on: July 23, 2015, 07:44:58 PM »
Found the spring and ball bearing, can't believe it. But I think I am missing a seal that goes between the barrel and value. I have a small black one that sits on the tube but nothing in the barrel.

Does anyone have a picture of one so I know what I am looking for. I can see it on the parts diagram, but is it rubber and black or something else.

Thanks.

Sent from my LT25i using Tapatalk

parriehunter.co.nz

Offline Pauly5

  • Hero Member
  • *****
  • Posts: 1871
  • Location: Porirua
  • Mana 28
  • Go ahead, make my day!
    • View Profile
Re: The starting of a 2250 Build
« Reply #42 on: July 23, 2015, 08:01:55 PM »
From memory, there isn't one. The long part of the transfer port goes into the tube, and the short goes into the barrel. I have used a bit of the small rubber tubing you get in bike tube repair kits, cut a small piece approx 1mm and stretched it over the barrel end to help seal it.
HW98
HW97k
Tx200
S510
HFT500
Bobcat
Matador R2.5
HW40 (copy)
Daisy 953
P-Rod
1377
Zoraki 22

Offline parriehunter

  • Jr. Member
  • **
  • Posts: 51
  • Age: 33
  • Location: Upper Hutt - Wellington
  • Mana 3
  • Hunt to Live - Live to Hunt
    • View Profile
    • Parriehunter
Re: The starting of a 2250 Build
« Reply #43 on: July 23, 2015, 08:23:48 PM »
From memory, there isn't one. The long part of the transfer port goes into the tube, and the short goes into the barrel. I have used a bit of the small rubber tubing you get in bike tube repair kits, cut a small piece approx 1mm and stretched it over the barrel end to help seal it.
Yea, I searched the part number and I have dropped the transfer port somewhere.

Sent from my LT25i using Tapatalk

parriehunter.co.nz

Offline Raizer

  • Sr. Member
  • ****
  • Posts: 323
  • Age: 33
  • Location: Gisborne
  • Mana 13
  • There is no Raizer, only Zuul
    • View Profile
Re: The starting of a 2250 Build
« Reply #44 on: July 23, 2015, 08:28:40 PM »